*
 
Setting Up a Computer for Printing/Sending a Fax

This section describes procedures for Setting Up a computer for printing/sending a fax.

Before setting up a computer for printing/sending a fax, it is necessary to perform the following setup procedures.

Remark
  • It is recommended that the network administrator perform the following procedures.
  • To set the machine to a network with the LASER CLASS 810, an optional network printer kit is required.

Introduction to Setting Up a Computer for Printing/Sending a Fax

Settings from the Operation Panel

Machine Connection Method (LPD/Raw)

Print Server Settings

 
  • Back To Top