e-Manual TopContentsHelpGlossary
Category
Top » Troubleshooting » When a Power Failure Occurs

Category Top

Error Codes

When a Power Failure Occurs

Clearing Jams

Document Jams in the Feeder

Paper Jams in the Output Area

Paper Jams in the Multi-Purpose Tray

Paper Jams in the Paper Drawer (Drawer 1 or 2)

Paper Jams in the Back Cover and Duplex Unit

Paper Jams in the Front Cover

Paper Jams in the 2-sided Transport Guide

When <Incorrect Size/Setting> Appears

Onscreen Messages

Troubleshooting

Paper Feeding Problems

Fax Problems

Sending Problems

Cannot Send a Fax

Receiving Problems

Modes Cannot Switch Automatically between Telephone and Fax
Faxes Cannot Be Printed, or the Images on Printouts Are Spotted or Distorted

Copying Problems

The Copy Output Is Hardly Readable and Copied Poorly

Printing Problems

Cannot Print Documents from a Computer

Cannot Print over a TCP/IP Network

Scanning Problems

Cannot Scan a Document

Telephone Problems

Network Problems

Wired LAN Troubles

Checking Network Connection (Wired LAN)

Wireless LAN Troubles

Checking Network Connection (Wireless LAN)

Installation and Uninstallation Problems

Miscellaneous Problems

Printing Results Are Not Good

Paper Curls

Paper Creases

Vertical Streaks Appear on the Output

Toner Smudges and Spatters Appear around Text and Images

The Bottom Edge of Paper or Following Paper Has Smudge Marks

A Portion of the Page Is Not Printed

Uninstalling the Software

When a Problem Cannot Be Resolved

Collapse all|Expand all
When a Power Failure Occurs
07K4-0S8
The machine cannot be used while the power supply is cut off.
When there is a power failure, you can or cannot perform the following fax operations.
You cannot send or receive faxes.
You may not be able to make a call using the external telephone, depending on your telephone system.
You may be able to answer a call using the external telephone, depending on your telephone system.
IMPORTANT
To save documents in memory when the power supply is cut off
If the power is lost due to a power failure or the power cord is accidentally unplugged, data can be stored in memory for approximately 24 hours so you can back it up. To store document in the memory requires the printer's built-in battery must be charged for more than 16 hours. (The printer's power switch is turned ON for more than 16 hours.)