e-Manual TopContentsHelpGlossary
Category
Top » Security » Specifying the Setting for Department ID Management » Specifying Whether or Not to Receive a Print Job from an Unknown ID

Category Top

Setting the System Manager Information

Attention (Specifying the System Manager Information)

Registering the Name of the Machine and Location

Specifying the Setting for Department ID Management

Registering Departments

Editing Departments

Activating the Department ID Management

Specifying Whether or Not to Receive a Print Job from an Unknown ID

Checking or Clearing the Count Information

Specifying Keys and Certificates/CA Certificates

Generating Keys and Certificates

Installing Keys and Certificates/CA Certificates

Verifying Keys and Certificates/CA Certificates

Registering Keys and Certificates/CA Certificates

Deleting Keys and Certificates/CA Certificates

Specifying SSL

Setting IEEE802.1X Authentication

Setting TLS Authentication Information

Setting TTLS/PEAP Authentication Information

Switching On/Off for IEEE802.1X Authentication

Checking Error Information for IEEE802.1X Authentication

Attention (IEEE802.1X Authentication)

Entering PIN for Printing (Secure Printing)

Setting Secure Printing

Printing by Secure Printing

Configuring the Remote UI

Restricting Network Connections

Restricting Sending/Receiving to/from Specific IP Addresses

Restricting Sending/Receiving to/from Specific MAC Addresses

Monitoring/Controlling Devices by SNMP (SNMP Setting)

Setting SNMPv1

Setting SNMPv3

Obtaining Printer Management Information from Host

Setting the Permission for HTTP Communications

Setting Protocol Port Numbers

Setting the Dedicated Port

Restricting to Specify Destinations and Use the Sending Functions

Setting a PIN for the Address Book

Restricting Destinations that Can Be Specified

Restricting to Send Faxes from Your Computer

Restricting Sending from Job History

Confirming the Entered Fax Number

Restricting Sequential Broadcasts

Specifying Display Settings for the Job History

Restricting USB Port or USB Memory Usage

Restricting External Device Connections via USB

Restricting Storing of Data in Memory Media

Restricting Printing of Data in Memory Media

Collapse all|Expand all
Specifying Whether or Not to Receive a Print Job from an Unknown ID
07K4-0K1
Specify whether a print job can be accepted from an unknown ID while the department ID management is active.
The following jobs are handled as a job with unknown ID.
Printing from a printer driver for which the department ID is not registered
A job in which a document is scanned and is sent to a computer
1
Start the Remote UI and log on in system manager mode.
"Starting the Remote UI"
2
Click [Settings/Registration].
3
Click [Department ID Management] -> [Settings].
4
Change settings, and then click [OK].
For [Allow Print Jobs with Unknown IDs]
If the check box is selected
Print jobs are received from a printer driver for which the department ID is not registered.
If the check box is not selected
Print jobs are not received from a printer driver for which the department ID is not registered.
For [Allow Scan Jobs with Unknown IDs]
If the check box is selected
Scan jobs with unknown IDs are received.
If the check box is not selected
Scan jobs with unknown IDs are not received.