e-Manual TopContentsHelpGlossary
Category
Top » Setting Up the Machine » Specifying Initial Settings for the Fax Functions and Connecting the Telephone Cable

Category Top

Setting Up the Machine the Way You Want It

Setting up the Machine

Checking the Supplied Accessories

Carrying the Machine to the Installation Location and Removing the Packing Materials

Attention (Carrying the Machine and Packing Materials)

Preparing to Use the Toner Cartridge

Attention (Preparing to Use the Toner Cartridge)

Loading Paper

Connecting the Handset

Connecting the Power Cord

Attention (Connecting the Power Cord)

Turning On the Machine and Specifying the Initial Settings

Setting the Paper Size and Type

Specifying Initial Settings for the Fax Functions and Connecting the Telephone Cable

Registering the Sender Information

Selecting the Receive Mode

Connecting the Telephone Line

Selecting the method for connecting to the machine

Attention (Connecting Your Computer to the Machine)

Selecting the Driver to Be Installed

Connecting to Wireless LAN

Connecting to Wired LAN

Checking the Network Connection

Checking Network Operation

Installing the Drivers and Software

User Software CD-ROM

Installing the Laser MFP Drivers and MF Toolbox

Attention (Installing the Laser MFP Drivers and MF Toolbox)

Installing the Laser MFP Drivers on the WSD Network

Collapse all|Expand all
Specifying Initial Settings for the Fax Functions and Connecting the Telephone Cable
07K4-00Y
Follow the steps in the procedure below to use the fax functions.
Specify the initial settings for the fax functions and connect the telephone line. Follow the instructions provided in "Fax Setup Guide."
Step 1
Register the fax number and unit name (sender's name).
"Registering the Sender Information"
Step 2
Set the receive mode based on your phone and fax needs.
"Selecting the Receive Mode"
Step 3
Connect the telephone line.
"Connecting the Telephone Line"