Installing the System Options/MEAP Applications

The procedures to install the system options or MEAP applications on the printer differ, depending on whether the printer is connected or not to an outside network. Select the procedure that matches your conditions using the references below.

Installing by Connecting this Printer to an Outside Network

Install from the Remote UI.

NOTE
Communication test To check that the transmission with the delivery server is properly operating, if necessary, perform a communication test before installation. "Testing Communication Using the Remote UI"

Installing by Not Connecting this Printer to an Outside Network

Installing System Options

Install using one of the following procedures.

NOTE
If you install multiple system options We recommend that you install from the Remote UI.

Procedure

Necessary Steps

Reference Page

Using the Remote UI to install

1.	Obtain the license file from the License Management System

"Obtaining the License File"

2.	Install the license file using the Remote UI

"Installing the System Options Using the Remote UI"

Installing MEAP Applications

Use the following procedure to install.

Procedure

Necessary Steps

Reference Page

Using the Remote UI to install

1.	Obtain the license file from the License Management System

"Obtaining the License File"

2.	Install the license file and application file using the Remote UI

"Installing the MEAP Applications Using the Remote UI"

3.	Start the MEAP applications from SMS

"Starting the MEAP Applications"