e-ManualTopSite mapHelp

Category Top

Preventing Unauthorized Access

Increasing Security

Restricting Access by Authentication

Administrator Settings

Specifying the System Manager Settings

Department ID Management

Specifying Department ID Management

Checking/Printing/Clearing Page Totals

Accepting Jobs with Unknown Department IDs

Accepting B&W Copy and Print Jobs without Entering a Department ID

Specifying Authentication Method for Rights Management Server

Network Security

IEEE 802.1X Authentication Settings

Key Pair and Server Certificate Settings for Encrypted SSL Communication

Generating a Key Pair and Server Certificate

Registering a Key Pair File and Server Certificate File Installed from a Computer

Setting the Key Pair Used With SSL Encrypted Communications

Editing Key Pairs and Server Certificates

Registering/Editing a CA Certificate File

Verifying Certificate Validity Using Certificate Revocation List

IPSec Settings

Preventing Information Leakage

Digital Signatures

Setting/Confirming a Key Pair and Device Certificate

Checking a Device Signature Certificate

Setting a Rights Management Server

Copy Set Numbering Options

Restricting the Send Function

Setting the Address Book

Mail Box Settings

Specifying Settings for All Mail Boxes

Specifying the Mail Box Security Settings

Setting the Control Panel Display

Specifying Management Settings for the Hard Disk

Completely Erasing Unnecessary Data from the Hard Disk

Initializing All Data/Settings

TPM Settings

Device Management

Device Information Settings

Specifying Device Information Delivery Settings

Registering/Deleting/Printing Delivery Destinations

Setting Automatic Delivery

Setting Manual Delivery

Setting the Receiving Machine

Checking/Printing the Communication Log

Limiting Functions

Remote UI

Clearing the Message Board

Retrieving Audit Logs

Saving a Log of Key Operations

Available Administrator Settings Table (Touch Panel Display)

Top » Security » Device Management » Clearing the Message Board
Clearing the Message Board
0S9Y-1K0
The Message Board is a function used by the administrator to display messages for users of the machine on the touch panel display or the Remote UI.
Specifying the message board display settings and entering messages are performed from the Remote UI. (See "Displaying/Clearing the Message Board.")
This section describes the procedure for clearing message boards that appear on the touch panel display, from the machine.
IMPORTANT
If you are using Department ID Management, you cannot clear a "message board without [OK] displayed," such as the one shown below, from the touch panel display. Clear such message boards from the Remote UI. (See "Clearing the Message Board.")
1.
Press (Settings/Registration).
2.
Press [Management Settings] → [License/Other] → [Delete Message Board Contents].
3.
Press [Yes].
NOTE
If [OK] is displayed on a message board, press [OK] to operate the machine.
If a Log In screen is displayed, enter the Department ID and PIN or user name and password to log in.
Back to Top