Outputting Reports
You can print a list of the Send/Receive settings that have been specified from the Settings/Registration screen as separate User Data Lists. This is useful for checking the details of the settings.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
NOTE
Lists can be printed only if 11" x 17", LGL, LTR, or LTRR (plain, recycled, thin, or color) is loaded in a paper source whose settings in [Other] in [Paper Drawer Auto Selection On/Off] in [Function Settings] (Settings/Registration) are set to 'On'. However, if [Consider Paper Type] for [Copy] is set to 'On' in [Paper Drawer Auto Selection On/Off], you cannot print from a paper source with color paper specified. (See "Enabling Paper Drawer Auto Selection.")
For more information on User Data Lists, see "User Data List."

1.
Press (Settings/Registration).
2.
Press [Function Settings] → [Send] → [Output Report].
3.
Press [TX/RX User Data List] → [Yes].
» Settings/Registration » Function Settings » Send » Outputting Reports
0S9Y-14J