Checking/Editing/Deleting the Information for a Destination

You can check, edit, or delete a specified destination before you scan your documents.

NOTE
You can only change new destinations or destinations obtained via an LDAP server.

Checking/Changing a Destination

Press

(Main Menu) → [Scan and Send] → specify the destination.

Select the destination → press [Details].

Check or change the information for the destination as necessary.

If the destination has been specified from the Local Address Book or Remote Address Book:

Check the information for the destination → press [OK].

If the destination has been specified from the Address Book (LDAP Server):

Check and/or edit the information for the destination as necessary → press [OK].

The procedure to change the information is the same as when specifying a new destination. (See "Specifying Destinations Using the Address Book (LDAP Server).")

If you entered a new destination:

Check and/or edit the information for the destination as necessary → press [OK].

If the destination is a group address:

Select the group address → press [Details].

Select the destination from the group → press [Details].

Check the information for the destination → press [OK] → [OK].

Deleting a Destination

Press

(Main Menu) → [Scan and Send] → specify the destination.

Select the destination to delete → press [Delete Dest.].

NOTE
If you want to change a destination after scanning is complete, do it from the Status Monitor/Cancel screen. (See "Resending Jobs/Changing Destination.")