Changing and Canceling Copy Settings

You can use the Setting Confirmation screen to confirm, change, or cancel selected copy modes.

Press

(Main Menu) → [Copy].

Set the desired copy modes → press [Check Settings].

You can check the settings.

NOTE
A right triangle () displayed on the [Change] button when a copy mode is selected indicates that more setting screens are available by pressing the key.

Change the selected copy mode → press [Change].

Changing the copy mode:

Change the settings → press [OK].

Change the settings as required, using the same procedure as for setting each mode.

Canceling the copy mode:

Press [Cancel Settings].

NOTE
To cancel a mode that does not have a setting screen, press [Change].

Press [OK].