Document Insertion Unit-N1 - Canon imagePRESS C10000VP/C8000VP e-Manual

Document Insertion Unit-N1

If the Add Cover, Insert Sheets, Job Separator, or Booklet mode is set, you can use the paper loaded in the document insertion unit as a cover or sheet insertion. If the Document Insertion Unit-N1 is attached to the Finisher-AN1/Saddle Finisher-AN2, you can use paper different to the main document pages for a cover or sheet insertion.

Parts and Their Functions

Insertion Unit

Parts and Their Functions

1.	Upper Tray You can load paper you want to use as a cover, sheet insertion, or job separator, etc.
2.	Lower Tray You can load paper you want to use as a cover, sheet insertion, or job separator, etc.
3.	Tray Cover Lift to load paper in the lower tray.
4.	Slide Guides Adjust the slide guides to match the width of the original.
5.	Front Cover Open this cover to remove jammed paper. (See "Document Insertion Unit-N1 (Optional).")

Insertion Unit

Document Insertion

If the Add Cover, Insert Sheets, Job Separator, or Booklet mode is set, you can use the paper loaded in the Document Insertion Unit-N1 as a cover or sheet insertion. If the Document Insertion Unit-N1 is attached to the Finisher-AN1/Saddle Finisher-AN2, you can use paper different to the main document pages for a cover or sheet insertion.

IMPORTANT
Paper which has been rolled or curled must be straightened out before placing it into the Document Insertion Unit-N1. (See "Caution for Paper Curl.") Do not place the following types of paper into the Document Insertion Unit-N1. Doing so may cause a paper jam. Insertion sheets with tears Severely curled or wrinkled paper Clipped or stapled insertion sheets Transparencies or other highly transparent insertion sheets Labels Some types of paper cannot be used with the Document Insertion Unit-N1. For more information, contact your local authorized Canon dealer.

IMPORTANT

Paper which has been rolled or curled must be straightened out before placing it into the Document Insertion Unit-N1. (See "Caution for Paper Curl.")

Do not place the following types of paper into the Document Insertion Unit-N1. Doing so may cause a paper jam.

Insertion sheets with tears

Severely curled or wrinkled paper

Clipped or stapled insertion sheets

Transparencies or other highly transparent insertion sheets

Labels

Some types of paper cannot be used with the Document Insertion Unit-N1. For more information, contact your local authorized Canon dealer.

NOTE
For information on the available paper, see "Available Paper Stock."

Document Insertion Unit Staple Settings and Output Results Table

How to Place the Cover Sheet/Original			Staple Settings/Output Result
Document Insertion Unit-N1*1	Feeder	Platen Glass	Staple Settings/Output Result
			Corner: Upper Left Double: Left LTR
			Corner: Lower Left Double: Left 11" x 17" 11" x 17" LGL
			Corner: Upper Right Double: Right 11" x 17" 11" x 17" LGL
			Corner: Lower Left Double: Left LTR
			Corner: Upper Right Double: Right LTR
			Corner: Upper Left Double: Left 11" x 17" 11" x 17" LGL
			Corner: Upper Right Double: Right LTR
			Corner: Upper Left 11" x 17", LGL
			Corner: Lower Right 11" x 17", LGL
			Corner: Upper Left LTR
			Corner: Lower Right LTR
			Corner: Upper Right Double: Right 11" x 17" 11" x 17" LGL
			Saddle Stitch