e-ManualTopSite mapHelp
Top » Web Access » Specifying Settings for the Display Screen
Specifying Settings for the Display Screen
0L3X-19Y
You can change the size and encoding of characters within a Web page.
Changing the Text Size
Changing the Character Encoding
Changing the Display Magnification
Changing the Text Size
You can change the text size of a Web page.
1.
Press (Main Menu) → [Web Access].
2.
Press [Menu].
3.
Press [Text Size].
4.
Select the text size → press [OK].
NOTE
You can select [Small], [Medium], or [Large]. The default text size is 'Medium'.
Even if you change the text size setting, the change may not be reflected for some Web pages.
Changing the Character Encoding
A Web page includes information about the character encoding (unique numbers that correspond to each character and symbol) of the display language. Character encoding varies with each Web page.
1.
Press (Main Menu) → [Web Access].
2.
Press [Menu].
3.
Press [Encode].
NOTE
If the characters of a Web page are unreadable, select an appropriate character code to display the characters correctly.
4.
Select the character code → press [OK].
NOTE
There may be cases in which the selected settings for the character code are not properly reflected even if you press [Encode] again after you specify the settings.
Changing the Display Magnification
You can adjust the display magnification for the screen.
The display magnification can be set from 50% to 200% in 25% increments.
1.
Press (Main Menu) → [Web Access].
2.
Press [Menu].
3.
Press [Zoom].
4.
Select the zoom size → press [OK].
NOTE
If multiple windows are open, the settings are applied only to the window that is currently displayed on top.
Back to Top