Available Administrator Settings Table (Remote UI)
If the administrator is specified, you can restrict operations by general users and allow the administrator to set the settings of each function from (Settings/Registration). The settings available for operation vary according to the type of administrator. This section describes the settings in (Settings/Registration) that each administrator can operate.
IMPORTANT
For information on the types of administrators, see "Administrator Settings."
Settings in [Adjustment/Maintenance] (Settings/Registration) cannot be set from the Remote UI.

Preferences
If the administrator is specified, the settings below in Preferences can be set only by the administrator.
: Only the administrator can change the settings.
-: Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registration
System Manager/System Administrator (Administrator)
Network Administrator (NetworkAdmin)
Device Administrator (DeviceAdmin)
[Restart Device]
[Paper Settings]
Paper Type Management Settings
-
[Display Settings]
Edit Puncher Unit Die Name
-
[Timer/Energy Settings]
Date/Time Settings
-
-
Time Format
-
-
Quick Startup Settings for Main Power
-
-
Restrict Auto Reset Time
-
-
[Network Settings]
TCP/IP Settings
-
IPv4 Settings
-
IPv6 Settings
-
WINS Settings
-
LPD Print Settings
-
RAW Print Settings
-
SNTP Settings
-
FTP Print Settings
-
WSD Settings
-
FTP PASV Mode Settings
-
IPP Print Settings
-
Multicast Discovery Settings
-
HTTP Settings
-
SSL Settings
-
Proxy Settings
-
Department ID PIN Confirmation Settings
-
IPSec Settings
-
NetWare Settings
-
AppleTalk Settings
-
SMB Server Settings
-
SNMP Settings
-
Dedicated Port Settings
-
Spooler
-
Waiting Time for Connection at Startup
-
Ethernet Driver Settings
-
IEEE 802.1X Settings
-
Firewall Settings
-
IPv4 Address Filter
-
IPv6 Address Filter
-
MAC Address Filter
-
IP Address Block Log
-
[External Interface]
USB Settings
-
-
Function Settings
If the administrator is specified, the settings below in Function Settings can be set only by the administrator.
: Only the administrator can change the settings.
-: Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registration
System Manager/System Administrator (Administrator)
Network Administrator (NetworkAdmin)
Device Administrator (DeviceAdmin)
[Common Settings]
Paper Output Settings
Normal/Rvrse. Order Output with Extrnl. Fin.
-
Face Up/Face Down Output with Extrnl. Fin.
-
Image Orient. When Output with Extrnl. Fin.
-
Print Settings
Copy Set Numbering Option Settings
-
Generate File
Rights Management Server Settings
Set Authentication Method
-
[Copy]
Select Color Settings for Copy
-
[Printer]
Restrict Printer Jobs
-
PDL Selection (Plug and Play)
-
[Send]
Common Settings
Confirm SSL Certificate for WebDAV TX
-
-
Restrict Resending from Log
-
-
TX Report/Communication Management Report
TX Report - Attach TX Image to Report
-
TX Report - Attach Color TX Image to Report
-
Network Settings - E-Mail/I-Fax Settings
Confirm SSL Certificate for POP RX
-
-
Confirm SSL Certificate for SMTP TX
-
-
Communications Settings - E-Mail/I-Fax Settings
-
Limit New Destination
-
Only Send E-Mail to Myself
-
Only Send File to Personal Folder
-
Personal Folder Specification Method
-
TX Settings - Fax Settings
Restrict Sequential Broadcast When Fax Destination Included
-
-
Confirm Before Sending When Fax Destination Included
-
-
Fax TX Report/Fax Activity Report
Fax TX Report - Attach TX Image to Report
-
PIN Code Access
-
Confirm Entered Fax Number
-
Remote Fax TX Settings
[Receive/Forward]
Common Settings
Interrupt and Print RX Jobs
-
-
Handle Files with Forwarding Errors
-
Divided Data RX Timeout/Always Send Notice for RX Errors
-
Forwarding Settings
-
Memory Lock Settings
-
[Store/Access Files]
Settings for All Mail Boxes
-
Box Security Settings
-
Memory Media Settings
-
[Secure Print]
-
Destination Settings
If the administrator is specified, the settings below in Set Destination can be set only by the administrator.
: Only the administrator can change the settings.
-: Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registration
System Manager/System Administrator (Administrator)
Network Administrator (NetworkAdmin)
Device Administrator (DeviceAdmin)
[Address Book PIN]
-
-
[Manage Address Book Access Numbers]
-
-
[Address Book Export Settings]
-
-
[Register LDAP Server]
[Register/Edit LDAP Search]
[Acquire Remote Address Book]
[Make Remote Address Book Open]
Management Settings
If the administrator is specified, the settings below in Management Settings can be set only by the administrator.
: Only the administrator can change the settings.
-: Depending on the type of the administrator when using the SSO-H, settings cannot be changed.
Settings/Registration
System Manager/System Administrator (Administrator)
Network Administrator (NetworkAdmin)
Device Administrator (DeviceAdmin)
[User Management]
System Manager/Contact Person Information Settings
-
-
Department ID Management
-
-
[Device Management]
Device Information Settings
-
-
Certificate Settings
Key and Certificate Settings
CA Certificate Settings
Certificate Revocation List (CRL) Settings
Display Job Status Before Authentication
-
-
Display Job Log
-
-
Save Audit Log
-
-
Export/Clear Audit Log
-
-
Key Operation Log Store Settings
-
-
Encryption Method Settings
-
-
[License/Other]
Message Board/Support Link
-
-
Remote UI Settings
-
-
Remote Operation Settings
-
-
MEAP Settings
-
-
Register/Update Software
-
-
[Data Management]
Hard Disk Data Complete Deletion
-
-
Import/Export All
Import
-
-
Export
-
-
Import/Export Results
-
-
Import/Export Individually
Address Lists
-
-
Device Settings (Forwarding Settings, Address Book, Send Function Favorite Settings)
-
-
Web Access Favorites
-
-
Printer Settings
-
-
Paper Information
-
-
Back Up/Restore Settings
Backup Location Settings
-
-
Auto Backup Settings
-
-
Back Up
-
-
Restore
-
-
Back Up/Restore Log
-
-
» Remote UI » Available Administrator Settings Table (Remote UI)
0L3X-218