Output Tray-A1
If the Output Tray-A1 is attached to the machine, the following modes are available:
Collate Mode
The prints are automatically collated into sets arranged in page order before they are delivered to the output tray.
Group Mode
All prints of the same original page are grouped together into sets before they are delivered to the output tray.
Rotate 90 Degrees Mode
If originals of the same size are printed, the prints are automatically collated into sets arranged in page order, and are output in alternating directions to the output tray.
Parts and Their Functions
Paper Sizes that can be Output
Parts and Their Functions
1.
Auxiliary Tray
Pull out the auxiliary tray if you are printing on large size paper (11" x 17", LGL, or LTRR).
2.
Output Tray
Prints are output to this tray.
Paper Sizes that can be Output
The following are paper sizes that can be output from the Output Tray-A1. However, some paper sizes may not be output, depending on the set functions.
: Available
-: Unavailable
Paper Size
Output Tray
13" x 19"
12" x 18"
12 5/8" x 17 11/16"
11" x 17"
LGL
LTR
LTRR
STMTR
EXEC
Custom Size (4" x 5 7/8" to 13" x 19 1/4" (100 mm x 148 mm to 330.2 mm x 487.7 mm))
Envelope
No.10(COM10)
Monarch
DL
ISO-C5
Nagagata 3
Yougatanaga 3
Kakugata 2
Custom Size (4" x 5 7/8" to 13" x 19 1/4" (100 mm x 148 mm to 330.2 mm x 487.7 mm))
» Optional Products » Output Tray-A1
0L3X-040