Specifying Authentication Method for Advanced Box

You can specify the authentication method for accessing the Advanced Box.

IMPORTANT
You can set [Use integrated authentication] in the following cases: If you manage users by login service, such as SSO-H If the login name and password for accessing the machine are the same as those that registered in [User Access Control for Advanced Box] If you access to the Advanced Box using the touch panel display This setting is invalid if you access to the Advanced Box from the Remote UI.

IMPORTANT

You can set [Use integrated authentication] in the following cases:

If you manage users by login service, such as SSO-H

If the login name and password for accessing the machine are the same as those that registered in [User Access Control for Advanced Box]

If you access to the Advanced Box using the touch panel display

This setting is invalid if you access to the Advanced Box from the Remote UI.

Start your Web browser → enter the following URL in the address bar.

http://<IP address of the machine or host name>

NOTE
You can also log in by entering the URL of [User Access Control for Advanced Box] in the address bar, as indicated below. (Case sensitive.) http://<IP address or host name of the machine>:8000/uactrl/

Select [System Manager Mode] → enter <System Manager ID:> and <System Manager PIN:> → click [Log In].

The following screen displays the default settings. If the Department ID Management or authentication for SSO-H is set, enter the necessary items for each log in.

Click [User Access Control for Advanced Box] from the Basic Tools.

Click [Authentication Method and Log Management].

Select the authentication method → click [Update].

If you want to use Integrated Authentication:

If you do not want to use Integrated Authentication:

If you want to use Integrated Authentication:

Select [Use integrated authentication].

If you do not want to use Integrated Authentication:

Deselect [Use integrated authentication].