Before you start the Remote UI, the administrator should perform the following:

• Specify the Network Settings

Specify the settings under Network in [Preferences] (Settings/Registration) and find out the machine's IP address. (See "Network.")

• Enable the Remote UI

Set Remote UI in Management Settings (Settings/Registration) to 'On'. It is also recommended that Device Information Settings in Device Management (Settings/Registration) is configured.

• Connection via a proxy server is not possible. If your system environment has a proxy server, perform the following setting. (As settings vary according to the system environment, consult the administrator for the network you are using.)

• Enter the IP address of the machine into Exceptions in the web browser proxy server settings.

• You must set your web browser to enable all cookies and use JavaScript. Otherwise, you will not be able to change the machine's settings using the Remote UI.

• If the control panel of the machine is being used for a particular operation and if you use the same operation on the Remote UI, the last setting is activated.

• If multiple Remote UIs are running simultaneously, the latest setting that was made is enabled. It is recommended that only one Remote UI be running at a time

• To enter characters from a web browser, use the characters that you can enter from the touch panel display of the machine. If you use the other characters, they may not be displayed/recognized properly on the machine.

• Back To Top