If the machine is connected by unidirectional communication, you must set the fax options (such as the fax board) attached to and installed in the machine manually.
|
NOTE
|
|
If the machine is connected by bidirectional communication, the settings for this procedure are disabled. Follow the procedure in "Verifying the Fax Information" to automatically set the options.
|
1.
Open [System Preferences] → click [Print & Fax].
2.
Click [Printing] → select your fax → click [Printer Setup].
3.
Select [Installable Options] → configure the options installed in the fax → click [Apply Changes].
|
IMPORTANT
|
|
Be sure to select only those options that are actually installed in the fax.
|
|
NOTE
|
|
If you close the [Printer Info] dialog box without clicking [Apply Changes] the settings you have made will not be saved.
|
1.
Open [System Preferences] → click [Print & Fax].
2.
Select the fax you are using → click [Options & Supplies].
3.
Click [Driver] → confirm that your fax is selected for [Print Using] → configure the options installed in the fax.
|
IMPORTANT
|
|
Be sure to select only those options that are actually installed in the fax.
|
4.
Click [OK].