|
Check the following (if you are using Windows, perform these from the MS-DOS prompt):
- Example using UNIX, where the FTP server has the IP address:
192.168.1.195
U:>ftp 192.168.1.195 *Connect to server Connected to 192.168.37.195.220 canmfs FTP server (UNIX(r) System V Release 4.0) ready.
User (192.168.37.195:(none)): user_name *User login
331 Password required for user_name.
Password: *Enter password
230 User user_name logged in.
ftp> cd /export/share *Move to data destination directory
250 CWD command successful.
ftp> bin *Set data transfer type (binary)
200 Type set to I.
ftp> put sample.tif *Set transfer file name for verification
ftp> bye *Cut off server connection
221 Goodbye
If, after checking the above, the file sharing still does not operate normally, consult the network administrator for the environment you are using. |