Adjust Color with "Auto Gradation Correction" |
When using the machine for the first time, it is necessary to adjust the gradation in order to obtain the optimum copy or print results.
This is a precise adjustment. The procedure involves making test prints and placing them on the feeder for scanning. Once this is complete, the machine automatically corrects the irregularities.
This is a quick and simple adjustment. Adjustment is made internally without outputting any test prints.
|
|
|
Recalibrations are made internally without outputting any test prints. |
If an error message appears: 1. Press the right Any key to select <Done> and return to the screen in step 3. 2. Load LTR or A4 plain paper into the stack bypass tray and set the paper size and type. 3. Use [], [] or (Scroll Wheel) to select <Full Correction>. |
Place the test print face down on the platen glass, with the black bands along the top left edge of the platen glass. |
|
|
If an error message appears: 1. Press the right Any key to select <Done> and return to the screen in step 3. 2. Load LTR or A4 plain paper into the stack bypass tray and set the paper size and type. 3. Use [], [] or (Scroll Wheel) to select <Full Correction>. |
Place the test print face down on the platen glass, with the black bands along the top left edge of the platen glass. |
|
|
|