0WR7-07H
 |
|
When scanning documents that are smaller than the scanning size, frame lines of the documents may appear in the scanned image. When scanning a thick book, dark borders may appear. This function enables you to erase these frame lines and dark borders. You can also erase punch holes in the documents.
|
|
IMPORTANT
|
|
Place the document with punch holes on the platen glass. Placing in the feeder may result in damage.
|
1
Place the document. Placing Documents
2
Press <Scan and Send> on the Main Menu. <Main Menu> Screen
3
Specify the destination on the Scan Basic Features screen. Scan Basic Features Screen
4
Press <Options> 
<Erase Frame>.
<Erase Frame>.5
Specify the erasing type and width.
Erasing the frames of documents|
1
|
Press <Erase Original Frame> and check <Original Size>.
 If the size displayed in <Original Size> is different from the size of the document you check, press <Change> to select the size.
|
|
2
|
Enter the width of the frame to erase.
|
Erasing dark borders of booksYou can erase the dark borders both in the center and contour lines that appear when you scan facing pages in a book.
|
1
|
Press <Erase Book Frame> and check <Original Size>.
 If the size displayed in <Original Size> is different from the size of the book you check, press <Change> to select the size.
|
|
2
|
Press <Center> or <Sides> and enter each erasing width.
|
Erasing punch holes in documents|
1
|
Press <Erase Binding> and select the punch hole location.
 |
|
2
|
Enter the erasing width.
|
NOTE:
If you want to adjust the width for each border independently, press <Erase Original Frame> or <Erase Book Frame>, and then press <Adjust Independently> to enter the erasing widths.
6
Press <OK> <Close>.
<Close>.7
Press 
.
.Documents are scanned and sending/saving starts.
