Web Access > Customizing Settings > Security Settings > Certificate Settings
*
Certificate Settings

Return to Overview

  1. Press [] (Menu) → [Settings] → [Security].

If necessary, see the screen shots in steps 1 and 2 of "Use SSL."
  1. Press [Certificates].

A list of certificates is displayed.
  1. Specify the settings for the certificates.
  • If you want to enable or disable a certificate:
  • If you want to confirm the details of a certificate:

  • If you want to enable or disable a certificate:
  • Select a certificate → press [Enable/Disable].
  • If you want to enable the certificate, press [Yes] when the screen below appears.

If you do not want to enable the certificate, press [No].

A check mark is displayed to the left of the certificate when it is enabled.
  • If you want to disable the certificate, press [Yes] when the screen below appears.

If you do not want to disable the certificate, press [No].

A check mark is not displayed to the left of the certificate when it is disabled.
  • Press [OK].

  • If you want to confirm the details of a certificate:
  • Select a certificate → press [Details].

The detailed information of the selected certificate is displayed.

The following details are displayed.

[Issue Destination]: The destination to which the certificate is issued
[Issuer]: The issuer of the certificate
[Expiration Date]: The date that the certificate expires
[Serial Number]: The serial number of the certificate
  • Press [Close] → [OK].

  • Back To Top