Return to Overview

This section describes the operations that can be performed from the Receive Status screen.

• If Suspended Job Timeout is set to 'On', a job which is suspended because no paper has been available for printing when the job is received is displayed as a suspended job after the specified time has elapsed.

1. Press (Status Monitor/Cancel) → [Receive].

2. Press [Job Status] → select the type of job whose log you want to check from the drop-down list.

3. Perform the required operation.

• To check the details of a Receive job:

• To cancel a Receive job (When Fax is selected):

• To check whether an I-fax has been received by the POP server (when Forward is selected):

• To check the details of a Receive job:

• Select the desired job → press [Details].

• To cancel a Receive job (When Fax is selected):

• Select the job that you want to cancel → [Stop] → [Yes].

• You cannot select multiple jobs and all at once. Select and cancel one job at a time.

• The canceled job is displayed as <NG> (No Good) on the Log screen.

• To check whether an I-fax has been received by the POP server (when Forward is selected):

• Press [Check I-Fax RX].

If an I-fax has been received by the POP server, reception starts.

• To use [Check I-Fax RX], set POP to 'On' in [Communication Settings] in [Function Settings] (Settings/Registration), and specify the settings for the POP server. (See "Common Communication Settings for E-Mail/I-Fax.")

• If [POP Interval] is set to something other than '0' in [Communication Settings] in [Function Settings] (Settings/Registration), reception is automatically checked at the set interval. (See "Common Communication Settings for E-Mail/I-Fax.")

• Reception is automatically performed when I-faxes are received with SMTP without going via a server. It is not necessary to check reception. SMTP reception settings are specified in [Communication Settings] in [Function Settings] (Settings/Registration). (See "Common Communication Settings for E-Mail/I-Fax.")

• Back To Top