This mode enables you to scan different size originals with the same widths (11"×17" and LTR, or LTRR and STMT, etc.) or different widths (11"×17" and LGL, or LTR and LGL, etc.), together as one group by setting them in the feeder.

• For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."

• If Document Size Select setting is set to anything other than 'Auto', all of the originals are scanned in the specified size. If you want to scan the originals in their original sizes, make sure to set Document Size Select to [Auto].

• If the originals are placed in the feeder, make sure that the different size originals are of the same weight (paper type).

• Align the top edge of the originals with the back edge of the feeder if you are placing originals with different widths.

• Set different size originals with different widths and lengths in the following combinations. Other combinations may damage the originals.

• 11"×17" and LGL, LTR and LGL, LTR and LTRR

• If you place originals with different widths in the feeder, the originals may move slightly when fed to the platen glass. As a result, the images may be scanned and copied as slanted.

• If the Different Size Originals mode is set, the scanning speed may be slower than normal.

• As an example, the procedure for scanning an original and storing it in a mail box is explained in this section.

1. Select the desired Mail Box.

2. Place your originals → press [Scan].

3. Press [Options] → [Different Size Originals].

4. Select the type of originals → press [OK].

Details of each item are shown below.

5. Press [Close].

6. Press (Start).

• Back To Top