Return to Overview

This mode erases the dark border, as well as center and contour lines that appear if you are scanning facing pages in a book or bound original onto a single sheet of recorded page.

• As an example, the procedure for scanning an original and storing it in a mail box is explained in this section.

1. Select the desired Mail Box.

2. Place your originals → press [Scan].

3. Press [Options] → [Erase Frame].

4. Press [Erase Book Frame].

To specify the size of the original you have placed, press [Change] → select the original size → press [OK].

• You can set the Erase Book Frame mode only for the original paper sizes shown on the touch panel display.

• To select an A or B series paper size, press [A/B-Size].

5. Press [-] or [+] to set the frame erase widths.

• If you want to set the same width for all four borders:

• If you want to set the top, left, center, right, and bottom widths independently:

• If you want to set the same width for all four borders:

• Press [Center] and [Sides] → press [-] or [+] to set their respective frame erase widths.

• If you want to set the top, left, center, right, and bottom widths independently:

• Press [Adjust Independently].

• Select the desired frame erase borders → press [-] or [+] to set their respective frame erase widths.

To return to the screen for setting the same width for all four borders, press [Uniform Width].

6. Press [OK] → [Close].

7. Press (Start).

• Back To Top