Return to Overview

This mode erases the dark borders and frame lines that appear around the scanned image if the original is smaller than the selected record size. You can also use this mode to create a blank border around the edge of the recorded page.

• As an example, the procedure for scanning an original and storing it in a mail box is explained in this section.

1. Select the desired Mail Box.

2. Place your originals → press [Scan].

3. Press [Options] → [Erase Frame].

4. Press [Erase Original Frame].

To specify the size of the original you have placed, press [Change] → select the original size → press [OK].

• You can set the Erase Original Frame mode only for the original paper sizes shown on the touch panel display.

• To select an A or B series paper size, press [A/B-Size].

5. Press [-] or [+] to set the frame erase width.

• If you want to set the same width for all four borders:

• If you want to set the top, left, right, and bottom widths independently:

• If you want to set the same width for all four borders:

• Press [-] or [+] to set the width of frame erase.

• If you want to set the top, left, right, and bottom widths independently:

• Press [Adjust Independently].

• Select the desired frame erase borders → press [-] or [+] to set their respective frame erase widths.

To return to the screen for setting the same width for all four borders, press [Uniform Width].

6. Press [OK] → [Close].

7. Press (Start).

• Back To Top