Scan and Store > Scanning Multiple Pages and Storing them on One Page
*
Scanning Multiple Pages and Storing them on One Page

This mode enables you to automatically reduce two, four, or eight originals, as well as two-sided originals or the facing pages of a book, to fit onto one side or both sides of a selected record size.

  • 2 On 1

This setting reduces two 1-sided originals or one 2-sided original to fit onto one side or both sides of one sheet of paper.

  • 4 On 1

This setting reduces four 1-sided or two 2-sided originals to fit onto one side or both sides of one sheet of paper.

  • 8 On 1

This setting reduces eight 1-sided or four 2-sided originals to fit onto one side or both sides of one sheet of paper.

Remark
  • This mode is only available for storing files in the Mail Box.
  • For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."
  • Originals scanned in the Image Combination mode must all be the same size. You cannot use the Image Combination mode with the Different Size Originals mode.
  • You can change or specify the 2-Sided Original mode before scanning the next batch of originals (i.e., between batches).
  • The reduction ratio is automatically set so that the originals fit onto the selected record size.

  1. Select the desired Mail Box.
  1. Place your originals → press [Scan].
  1. Press [Options] → [N on 1].
  1. Select the number of pages you want to print on one page.

If you want to specify the image order, press [Set Details] → select the image order → press [OK].

If you do not change the image order by pressing [Set Details], the images are printed as follows:

  • 2 On 1:
 Left → Right
  • 4 On 1 and 8 On 1:
 Upper Left → Upper Right → Lower Left → Lower Right
  1. Press [Change] for the original size.
  1. Select the desired original size → press [OK].
  • To select an A or B series paper size, press [A/B-Size].
  • [2-Sided Original] cannot be selected if STMTR is the selected original size.

If the original is two-sided, press [2-Sided Original] → select the type of two-sided original → press [OK].

Details of each item are shown below.

[Book Type]: The front and back sides of the original have the same top-bottom orientation.
[Calendar Type]: The front and back sides of the original have opposite top-bottom orientations.
  1. Press [Change] for the data output size.
  1. Select the desired record size → press [OK].
  • To select an A or B series paper size, press [A/B-Size].
  1. Press [OK] → [Close].
  1. Press (Start).

  • Back To Top