You can scan both sides of a two-sided documents loaded in the feeder.

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)" or "Optional Products Required for Each Function (imageRUNNER ADVANCE C7065/C7055)."

• For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."

• When you are scanning originals with a horizontal (landscape) orientation, such as LTRR and STMTR, make sure to place them horizontally in the feeder. If these originals are placed vertically, the back sides of the originals are scanned upside down.

• If you placed your originals on the platen glass, follow the instructions displayed on the screen to scan each side of the originals.

• To cancel this setting, press [2-Sided Original] → [Cancel Settings].

• As an example, the procedure for scanning an original and storing it in a mail box is explained in this section.

1. Select the desired Mail Box.

2. Place your originals → press [Scan].

3. Press [2-Sided Original].

4. Select the type of original → press [OK].

Details of each item are shown below.

5. Press (Start).

• Back To Top