Scan and Store > Changing the Zoom Ratio > Reducing/Enlarging Using the Original and Record Sizes > Scanning with Different XY Zoom Ratios (XY Independent)
*
Scanning with Different XY Zoom Ratios (XY Independent)

Return to Overview

  1. Select the desired Mail Box.
  1. Place your originals → press [Scan].
  1. Press [Copy Ratio].
  1. Press [Set by Length].
  1. Press [XY Independent].
  1. Use the numeric keys on the touch panel display to enter values for the original size and record size.
  • Press [X] (horizontal axis) for Original Size → enter a value.
  • Press [Y] (vertical axis) for Original Size → enter a value.
  • Press [X] (horizontal axis) for Data Output Size → enter a value.
  • Press [Y] (vertical axis) for Data Output Size → enter a value.
  • Press [OK].

You can enter either the width or the length of the original size. If you enter the width for the original size, make sure to enter the width for the record size as well, and vice versa.

The machine automatically calculates the correct zoom ratio based on the values you entered; however, the original image may be cut off slightly depending on the record size.

If the computation results in a zoom ratio less than 25% or greater than 400%, a message appears telling you that values below 25% will be set to 25%, and values above 400% will be set to 400%.

  • To specify the same zoom ratio for both the horizontal (X) and vertical (Y) axes, press [XY Same Ratio]. (See "Scanning with the Same XY Zoom Ratio (XY Same Ratio)")
  1. Press (Start).

  • Back To Top