Return to Overview

This setting selects whether the printouts should be Z-Folded or C-Folded.

• [Z-Fold]

This setting enables you to specify whether the printouts should be Z-folded.

• Paper with a Z-fold may be wrinkled depending on the type of paper and the environment used.

• You cannot use this setting in combination with 'Booklet' or 'Saddle Stitch'.

• This function is available for selection if the Paper Folding Unit-G1 is attached to the Booklet Finisher-A1 or Booklet Finisher-B1.

• You can select Z-fold for the following paper sizes and types:

• Paper sizes: A3, 11" x 17"
• Paper types: Plain Paper, Recycled Paper 1, Recycled Paper 2, Color Paper, Thin Paper

• The maximum number of sheets that can be output to the paper trays is 20 for the upper and 30 for the bottom.

• If you use this setting in combination with [Staple+Collate] or [Staple+Group], the maximum number of sheets that can be stapled is 10. If the number of sheets is greater than this, they will be collated, but not stapled.

• You can adjust the width to fold paper with [Z-Fold Placement Adjustment] in Adjustment/Cleaning settings (from the Additional Functions screen). For details on this setting, see "Adjust Fold Position."

• [C-Fold]

This setting enables you to specify that the printouts should be C-folded.

This is a handy function for folding printouts to be inserted in an envelope.

• This menu is only displayed for selection if the Document Insertion / Folding Unit-G1 or Paper Folding Unit-G1 is attached.

• C-folded paper might be wrinkled depending on the type of paper and the operating environment.

• You cannot use this function in combination with the following functions or operations.

• Booklet
• Saddle Stitch
• Transparency Interleaving
• [Staple+Collate] or [Staple+Group] during Finishing
• Punch
• Creep Correction
• Cover, Sheet Insertion, Job Separator, Tab Paper

• You can select C-Fold for the following paper sizes and types.

• Paper sizes: A4R, Letter-R
• Paper types: Plain Paper, Recycled Paper 1, Recycled Paper 2, Color Paper, Thin Paper

• The maximum number of sheets that can be output to the paper trays is 40.

• Under normal conditions, the print surface when C-Folding is the front, however, by selecting [Face Up] in 'Face Up/Down', you can C-Fold with the print surface on the back (inside). When performing two-sided printing, the paper is C-Folded with both the front and back sides printed.

• You can adjust the width to fold paper with [C-Fold Placement Adjustment] in Adjustment/Cleaning settings. You should specify a value for this setting to adjust the folding width of C-folded paper to match the size needed to fit in an envelope, or to adjust the positioning of an image on C-folded paper to be visible through a window envelope. For details on this setting, see "Adjust Fold Position."

• Back To Top