Return to Overview

This setting enables you to specify whether to add a cover at the front of the printed output.

If [Insertion 1], [Insertion 2], is selected, a cover is inserted automatically at the front of the printed output. If used in combination with Staple settings, it is a handy function for arranging documents.

The paper to be used as the cover should be placed in the inserter.

• Nothing will be printed on the paper used for the cover.

• You cannot use this function in combination with 'Transparency Interleaving'.

• This function cannot be used if the 'Finishing' is set to [Off], [Collate], [Offset+Group], or [Staple+Group].

• This function is available for selection if the Document Insertion Unit-H1 or Document Insertion Unit-J1 is attached.

• This function can be used in combination with [Staple+Collate], 'Punch', and 'Fold'.

• You can place the following paper sizes and types in the Document Insertion Unit-H1:

• Paper sizes: 11"×17", LGL, LTR, LTRR, SPA3, 12"×18", EXEC, 13"×19"

• Paper types: Thin, Plain Paper, Heavy, Recycled, Color Paper, Pre-punched, Bond Paper, Tab Paper, Lables, Coated, Texture Paper, or Vellum Paper

• You can place the following paper sizes and types in the Document Insertion Unit-J1:

• Paper sizes: 11"×17", LGL, LTR, LTRR, SPA3, 12"×18", EXEC, 13"×19"

• Paper types: Thin, Plain Paper, Heavy, Recycled, Color Paper, Bond Paper, Tab Paper, Lables, Coated, Texture Paper, or Vellum Paper

• Back To Top