If the Card Reader-C1/Copy Card Reader-F1 is attached to the machine, you must insert a control card to operate it. The Card Reader-C1/Copy Card Reader-F1 performs Department ID Management by using the control card.

• Card Reader-C1 and Copy Card Reader-F1 cannot be attached at the same time.

• If you are using a login service other than default authentication, the Limit Functions mode will not be available.

• If SSO-H is set as the login service, you cannot use the Card Reader-C1/Copy Card Reader-F1.

• If the Main Menu screen does not appear on the touch panel display when the control card is inserted, make sure that:

• The control card is inserted in the correct direction.

• The control card is inserted as far as it can go.

• An unusable control card is not inserted. (For example, cards, which are damaged or cards prohibited from use.)

• Insert a usable control card correctly.

• For instructions on turning the power ON, see "Before You Start Using This Machine."

Magnetic Type Card shown on the right can be used with the Card Reader-C1 and Copy Card Reader-F1. The card can manage up to 1,000 departments.

The following cards can be used with the Card Reader-C1 and Copy Card Reader-F1:

: Available

-: Unavailable

	Optical Type Card	Magnetic Type Card
Card Reader-C1
Copy Card Reader-F1	-

• Back To Top