| 1 |
Booklet Finisher-B1
The Booklet Finisher-B1 is equipped with the following features: Collate, Group, Offset, Staple (Corner, Double, and Saddle Stitch), and Saddle Fold. |
2 |
Document Insertion/Folding Unit-G1/Document Insertion Unit-J1
If the Document Insertion/Folding Unit-G1 or Document Insertion Unit-J1 is attached to a finisher, you can insert covers into documents. If the Document Insertion/Folding Unit-G1 is attached, you can also perform C-folding and Z-folding. |
| 3 |
External 2/3 Hole Puncher-A1
The External 2/3 Hole Puncher-A1 is equipped with the Hole Punch mode. The External 2/3 Hole Puncher-A1 can be attached only if the Staple Finisher-B1 or Booklet Finisher-B1 is attached. |
4 |
Duplex Color Image Reader Unit-A1
Originals placed in the feeder are automatically fed sheet by sheet to the platen glass for scanning. You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-A1. |
| 5 |
Upright Control Panel-A1
Instead of the flat control panel, you can attach the upright control panel. |
6 |
Card Reader-C1/Copy Card Reader-F1
The Card Reader-C1/Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards. |
| 7 |
POD Deck Lite-A1
If The POD Deck Lite-A1 is attached, it can provide an additional paper source. The POD Deck Lite-A1 holds up to 3,500 sheets of paper (20 lb bond (80 g/m2)). |
8 |
Staple Cartridge-D2/D3
The Staple Cartridge-D2/D3 can be attached to the Booklet Finisher-B1 for saddle stitching. |
| 9 |
Staple-J1
The Staple-J1 can be attached to the finisher for stapling (Corner and Double). |
10 |
Paper Deck Unit-A1
If the Paper Deck Unit-A1 is attached, it can provide an additional paper source. The Paper Deck Unit-A1 holds up to 3,500 sheets of paper (20 lb bond (80 g/m2)). |
| 11 |
Printer Cover-B1
Instead of the feeder, you can attach the Printer Cover-B1. |
12 |
Copy Tray-P1
The Copy Tray-P1 is equipped with the following
features: Collate, Group, and Rotate 90 degrees. |
| 13 |
Staple Finisher-B1
Staple Finisher-B1 is equipped with the following
features: Collate, Group, Offset, and Staple
(Corner and Double). |
 |
|
