Optional Products (imageRUNNER ADVANCE C9075 PRO/C9065 PRO) > Card Reader-C1/Copy Card Reader-F1 > Department ID Management > Checking and Printing Counter Information
*
Checking and Printing Counter Information

Return to Overview

You can display and print a list of how much paper was used by each department.

For information on the procedures of the Settings/Registration screen, see "Flow of Settings/Registration Operations."

  1. Press [Page Totals].
  1. Check or print the page total count.

The print page totals that belong to print jobs without a Department ID (left blank) are the number of prints from computers that do not correspond with a registered Department ID. These prints are referred to as prints with unknown IDs.

The scan page totals that belong to scan jobs without a Department ID (left blank) are the number of pages that have been scanned from computers that do not correspond with a registered Department ID. The scanned pages from computers are referred to as network scans with unknown IDs.

If [Large2 Count Management] is pressed, one sheet of large paper (11" × 17") is counted as two print pages.

  • If you only want to check the counter information:
  • If you want to print the displayed list:

  • If you only want to check the counter information:
  • Press [] or [] to display the desired Department ID → press [] or [] to display and view the desired page totals.
  • Press and hold down [] or [] to quickly and continuously scroll through the available Department ID pages. Continuous scrolling is useful when a large number of Department IDs are registered.

  • If you want to print the displayed list:
  • Press [Print List].
  • Press [Start Printing].
  • To cancel printing, press [Cancel].
  • To close the screen that is displayed while the machine is printing the Page Count List, press [Close].
  • The counter information can be printed only if 11" × 17", LGL, LTR, or LTRR (plain, recycled, thin, or color paper) is loaded in a paper source whose settings in [Other] in [Paper Drawer Auto Selection On/Off] in [Function Settings] (Settings/Registration) are set to 'On'. However, if [Consider Paper Type] for [Copy] is set to 'On' in [Paper Drawer Auto Selection On/Off], you cannot print from a paper source with color paper specified. (See "Setting the Paper Drawer Auto Selection On/Off.")

  1. Press [OK] → [OK].

  • Back To Top