Return to Overview

• Z-Fold mode
  

The Paper Folding Unit-G1 folds 11" × 17" or LTRR paper into LTR or STMT size, respectively. When multiple copies of differently sized originals must be made, the Z-Fold mode enables you to easily handle paper with the same leading edge length but different width.

Paper folded in a Z-fold is output to the tray specified for the Finisher.

• 11" × 17" and LTRR paper can be z-folded together. However, if Auto Orientation is set to 'Off', part of the image may cut off.

• The Z-folded areas are as shown in the illustration below.
  

• If paper that has been Z-folded is included in the output, the sheets may not be aligned when output.

• Half Fold Mode
  

Each sheet of LTRR papers is half folded.

Paper folded in a half fold is output to the tray specified for the finisher.

• The half folded areas are as shown in the illustration below.
  

• C-Fold mode

LTRR prints are C-folded to make them into a more convenient size for inserting them into envelopes.

Paper folded in a C-fold is output to the Exit Slot of the Paper Folding Unit.

• The C-folded areas are as shown in the illustration below.
  

• Accordion Z-Fold Mode

Each sheet of LTRR paper is folded in an accordion Z-fold.

Paper folded in an accordion Z-fold is output to the Exit Slot of the Paper Folding Unit.

• The accordion Z-folded areas are as shown in the illustration below.
  

• Double Parallel Fold Mode

Each sheet of LGL and LTRR paper is folded in a double parallel fold.

Paper folded in a double parallel fold is output to the Exit Slot of the Paper Folding Unit.

• The double parallel folded areas are as shown in the illustration below.
  

The paper outputs to the following Exit Slot, depending on the folding modes.

• Back To Top