Return to Overview

• Insertion Unit

If the Add Cover, Insert Sheets, Job Separator, or Booklet mode is set, you can use the paper loaded in the document insertion unit as a cover. If the Document Insertion Unit-H1 is attached to the finisher, you can use paper different to the main document pages for a cover.

• Paper which has been rolled or curled must be straightened out before placing it into the Document Insertion Unit-H1.

• Do not place the following types of paper into the Document Insertion Unit. Doing so may cause a paper jam.

• Insertion sheets with holes or tears

• Severely curled or wrinkled paper

• Clipped or stapled insertion sheets

• Transparencies or other highly transparent insertion sheets

• Labels

• Some types of paper cannot be used with the Document Insertion Unit-H1. For more information, contact your local authorized Canon dealer.

• Document Insertion Unit Staple Settings and Output Results Table

How to Place the Cover Sheet/Original			Staple Settings	Output Result
Document Insertion Unit*1	Feeder	Platen Glass
			Corner:Upper Left Double:Left	LTR
			Corner:Lower Left Double:Left	11" × 17" LGL 11" × 17"
			Corner:Upper Right Double:Right
			Corner:Lower Left Double:Left	LTR
			Corner:Upper Right Double:Right
			Corner:Upper Left Double:Left	11" × 17" LGL 11" × 17"
			Corner:Upper Right Double:Right	LTR
			Corner:Upper Left	11" × 17", LGL
			Corner:Lower Right
			Corner:Upper Left	LTR
			Corner:Lower Right
			Corner:Upper Right Double:Right	11" × 17" LGL 11" × 17"
			Saddle Stitch

• For instructions on loading paper into the Document Insertion Unit-H1, see "Maintenance."

• Back To Top