| 1 |
Buffer Pass Unit-F1 (standard-equipped)
The Buffer Pass Unit-F1 is required to attach the Staple Finisher-A1 or Booklet Finisher-A1 to the main unit. Open the Buffer Pass Unit-F1 to remove jammed paper. (See "Problem Solving.")
|
2 |
Front Cover of the Staple Finisher-A1/Booklet Finisher-A1
Open this cover to replace the staple cartridge, remove jammed paper, or clear a staple jam in the stapler unit and saddle stitcher unit. (See "Maintenance," and "Problem Solving.") |
| 3 |
Booklet Tray (Booklet Finisher-A1)
Prints that are saddle stitched or saddle folded are output to this tray. |
4 |
Output Tray C
Prints are output to this tray. You can set the Tray Designation mode to designate this tray for outputting prints when using certain functions. (See "Output Tray Designation.") |
| 5 |
Output Tray B
Prints are output to this tray. You can set the Tray Designation mode to designate this tray for outputting prints when using certain functions. (See "Output Tray Designation.") |
6 |
Output Tray A
Prints are output to this tray. You can set the Tray Designation mode to designate this tray for outputting prints when using certain functions. (See "Output Tray Designation.") |
