Return to Overview

1. Check whether communication via the IP address of the computer in which you intend to install the driver is permitted in [Firewall Settings] on the Network screen. For details, see step 8 in "TCP/IPv4 Settings," or step 6 in "TCP/IPv6 Settings."

• If communication via the relevant IP address is not permitted in [Firewall Settings] on the Network screen, you cannot install the driver.

• After you have installed the driver, if communication via the IP address of the computer you have installed it on is not permitted in [Firewall Settings], you cannot print or send a fax from that computer.

2. Install the driver.

Install the driver according to the instructions in the manual for each driver.

• If you want to use the UFR II printer driver in a Mac OS X 10.4.9 or later environment
  See the Mac UFR II Printer Driver Installation Guide.

• If you want to use the PS printer driver in a Mac OS X 10.4.9 or later environment
  See the Mac PS Printer Driver Installation Guide.

• If you want to use a PS printer driver provided by Apple Inc.
  For instructions on how to install the corresponding PPD file from Canon, see Chapter 14, "Before Printing from Computers," in Getting Started. For details about the PS printer driver, see the documentation provided with your Macintosh.

• The UFR II/PS printer driver can be used only in a Mac OS X 10.4.9 or later environment.

• If you are using the imagePASS or the ColorPASS, see the manual provided with the imagePASS or the ColorPASS.

• If you are using the imagePASS or the ColorPASS, some functions are not available with this machine. For details, see the manual provided with the imagePASS or the ColorPASS.

• Back To Top