Return to Overview

1. In the printer properties dialog box of the printer you installed, select the [Ports] sheet → click [Add Port].

2. In the [Printer Ports] dialog box, from [Available ports types], select [Standard TCP/IP Port] → click [New Port].

3. According to the instructions on the Add Standard TCP/IP Printer Port Wizard, in [Printer Name or IP Address], enter the printer IP address or printer host name → exit the Wizard.

If the dialog box displays <Additional Port Information Required>, follow the instructions on the screen to search again, or click [Standard] → click [Canon Network Printing Device with P9100] under [Device type].

4. In the printer properties dialog box, click [Configure Port] → select [LPR] or [Raw].

If you use LPD, you can specify one of the following print queues in [Queue Name].

• LP
  The machine prints according to its spool settings. Normally, <LP> is entered as a print queue.

• SPOOL
  The machine prints only after spooling a print job on the hard disk, regardless of its spool settings.

• DIRECT
  The machine prints without spooling a print job on the hard disk, regardless of its spool settings.

• Back To Top