Return to Overview

1. Press and release the button on the paper drawer in which you want to load tab paper.

2. Grip the handle, and pull out the paper drawer until it stops.

3. Remove the tab paper guide from its holder by sliding it to the left and lifting it up, and place it as shown below.

4. Load the tab paper into the paper drawer.

• Paper which has been rolled or curled must be straightened out prior to use.

• Make sure that the height of the paper stack does not exceed the limit mark () at the back of the paper drawer.

5. Squeeze the lever on the front guide, as shown in the illustration. While squeezing the lever, slide the front guide until it fits the tab.

Set the left guide to LTR, if necessary.

6. Gently push the paper drawer back into the machine until it clicks into place in the closed position.

• When returning the paper drawer to its original position, be careful not to get your fingers caught, as this may result in personal injury.

• Never place paper or any other items in the open part of the paper drawer next to the paper stack. Doing so may cause a paper jam.

• When you are not loading tab paper, make sure to return the tab paper guide to its holder. Using the tab paper guide for storing paper other than tab paper may cause a paper jam.

• When you load tab, make sure to register the paper type. (See "Registering the Paper Type for the Paper Source".)

• Back To Top