Return to Overview

If your originals have black streaks or appear dirty after scanning them through the feeder, clean the rollers of the feeder.

• This procedure is necessary only if the Feeder is attached.

• It takes approximately 20 seconds to clean the feeder.

• Feeder Cleaning cannot be performed during printing.

1. Press (Settings/Registration) → [Adjustment/Maintenance] → [Maintenance] → [Clean Feeder].

2. Place 10 sheets of blank paper into the feeder → press [Start].

Make sure that you fan the sheets of paper well.

Use normal LTR paper.

When cleaning is complete, try scanning again.

• To cancel feeder cleaning while it is in progress, press [Cancel].

• Back To Top