Return to Overview

Follow the procedure below to load paper into the Document Insertion/Folding Unit-G1/Document Insertion Unit-J1.

1. Adjust the slide guides to fit the paper size.

2. Load the paper stack into the document insertion unit.

Load the paper face up.

• Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding.

• Only load paper for use as a cover.

• You cannot make copies or prints on paper that is loaded in the document insertion unit.

• You can load 13" × 19", 12 5/8" × 17 11/16", 12" × 18", 11" × 17", LGL, LTR, LTRR, and EXEC.

• A maximum of 100 sheets of paper (20 lb bond (80 g/m²)) can be loaded in the tray of the document insertion unit.

3. Select the desired paper size → press [Next].

• Select the same paper size that is loaded in the document insertion unit.

• To select an A or B series paper size, press [A/B-size].

4. Select the desired paper type → press [OK].

• When printing on special types of paper, such as heavy paper, be sure to correctly set the paper type. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper could jam.

• For more information on available paper stock that can be loaded into the Document Insertion/Folding Unit-G1/Document Insertion Unit-J1, see "Basic Operations"

• Back To Top