Return to Overview

If you want to load a different paper size into a paper drawer, follow the procedure described below to adjust the paper drawer guides.

• Only LTR transparencies can be used. Make sure that the left guide is set to 'LTR' when loading transparencies in a paper drawer. If transparencies of a different size (other than LTR) are loaded in a paper drawer, the paper size and remaining amount of paper will not be detected correctly.

1. Press and release the button on the paper drawer that you want to adjust. Grip the handle, and pull out the paper drawer until it stops. Remove all of the remaining paper.

2. Slide the left guide to align it with the mark for the desired paper size.

Slide the guide until it clicks into place.

3. Squeeze the lever on the front guide, as shown below. Without releasing the lever, slide the front guide to align it with the mark for the desired paper size.

Slide the guide until it clicks into place.

• Adjust the guides correctly to avoid causing a paper jam, dirty prints, or making the inside of the machine dirty.

4. Load the appropriate size paper into the paper drawer.

• When loading paper, take care not to cut your hands on the edges of the paper.

5. Adjust the paper size label to show the new paper size.

6. Gently push the paper drawer back into the machine until it clicks into place in the closed position.

• When returning the paper drawer to its original position, be careful not to get your fingers caught, as this may result in personal injury.

• Back To Top