Return to Overview

To use SMS, it is necessary to use SSL communication.

• The default setting is 'Off'.

1. Press (Settings/Registration) → [Management Settings].

2. Press [License/Other] → [MEAP Settings] → [SSL Settings].

3. Press [On].

[On]: SSL communication is used.

[Off]: SSL communication is not used.

• The settings for [SSL Settings] are also applied to the settings for <Use SSL> in [Remote UI] in [Management Settings] (Settings/Registration).

• To set [SSL Settings] to 'On', it is necessary to set the key pair and server certificate required for performing encrypted SSL communications in [Certificate Settings] in [Management Settings] (Settings/Registration). For information on generating the key for SSL, see "Key Pair and Server Certificate Settings for Encrypted SSL Communication."

4. Press [OK].

The selected mode is set.

5. Turn the main power of the machine OFF, wait 10 seconds, and then turn the power ON.

• The settings for [SSL Settings] are activated only after you restart the machine (the main power switch is turned OFF, and then back ON). For instructions on turning the power ON/OFF, see "Before You Start Using This Machine."

• Back To Top