Hold > Collating Prints > Page Order (Staple)
*
Page Order (Staple)

Return to Overview

Remark
  • The Staple mode can be set only if a finisher is attached.
  • When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty, or the paper could jam, and a service repair may be needed.

  1. Select the desired job from the Hold Job List → press [Details/Edit] → [Edit/Confirm Job Ticket].
  1. Press [Edit] under <Overall Settings>.
  1. Press [Finishing].
  1. Press [Staple].
  • If the Staple Finisher-A1 or Staple Finisher-B1 is attached:
  • If the Booklet Finisher-A1 or Booklet Finisher-B1 is attached:

  • If the Staple Finisher-A1 or Staple Finisher-B1 is attached:
  • Press [Next].
  • Select the stapling type ([Corner] or [Double]) → select the stapling position → press [OK].

  • If the Booklet Finisher-A1 or Booklet Finisher-B1 is attached:
  • Press [Next].
  • Select the stapling type ([Corner], [Double], or [Saddle Stitch]).

If you want to select [Corner] or [Double]:

  • Press [Corner] or [Double] → select the stapling position → press [OK].

If you want to select [Saddle Stitch]:

  • Press [Saddle Stitch].
  • To change the position of the saddle stitch, press [Change Stitching Position] → select the paper size → adjust the position → press [OK].
  • Press [Change] → select the paper source to use for the main document → press [OK].
  • If you want the edges of the booklet trimmed, press [Trim].
  • [Trim] is displayed if the Booklet Finisher-A1 and the Inner Booklet Trimmer-A1 are attached. (If you are using the imageRUNNER ADVANCE C9075 PRO/C9065 PRO)
  • If you want to adjust the trim width, press [Adjust Trim Width] → adjust the trim width → press [OK].

If you selected the paper to use for the main document from [Change MP Tray Paper], select the paper size → press [Next] → select the paper type → press [OK].

If you are feeding cover paper from the Document Insertion Unit-H1, Document Insertion Unit-J1, or Document Insertion / Folding Unit-G1, select [Leave Blank].

  • Only 16 lb bond to 80 lb cover (60 to 220 g/m2) paper can be used for the main document. (for the Booklet Finisher-A1)
  • Only 17 lb bond to 80 lb cover (64 to 220 g/m2) paper can be used for the main document. (for the Booklet Finisher-B1)
  • You can display the detailed information of the selected paper by pressing .

  1. Press [Close].

  • Back To Top