Return to Overview

You can set to store the received fax documents in the Memory RX Inbox without printing them. After verifying the documents on the Memory RX Inbox screen, you can print or send them whenever necessary.

If you set Use Fax Memory Lock mode to 'On', you can turn Fax Memory Lock for documents sent to the Memory RX Inbox 'On' or 'Off' as necessary. If Fax Memory Lock mode is set to 'On', received documents are stored in the Memory RX Inbox instead of being printed. (See "Fax/I-Fax Inbox.")

For information on the optional products required to use this function, see "Optional Products Required for Each Function (imageRUNNER ADVANCE C9075 PRO/C9065 PRO)" or "Optional Products Required for Each Function (imageRUNNER ADVANCE C7065/C7055)."

• Additional documents cannot be stored in the Memory RX Inbox under the following conditions. (These numbers may vary depending on the remaining capacity of the hard disk.)

• When a total of 1,500 documents have been stored in the Mail Box or the Fax/I-Fax Inbox.

• When a total of 6,000 pages have been stored in the Mail Box or the Fax/I-Fax Inbox.

• To receive documents in memory, you must first set [Use Fax Memory Lock] in [Set Fax/I-Fax Inbox] in [Common Settings] in [Receive/Forward] in [Function Settings] (Settings/Registration) to 'On'. (See "Fax/I-Fax Inbox.")

• Back To Top