Fax > Using the Machine to Send/Receive a Fax > Useful Fax Function (Options) > Finished Stamp
*
Finished Stamp

Return to Overview

The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front side of scanned and sent originals.


Vertical Placement


Horizontal Placement


Remark
  • The Finished Stamp mode cannot be used when sending a fax document in the Direct Sending or Manual Sending mode.
  • The finished stamp is applied to the originals that are scanned from the feeder.
  • The Finished Stamp mode cannot be used with the Scan Size (Custom), or Book 2 Pages mode.
  • To cancel this setting, press [Options] → [Finished Stamp].

  1. Press [Options] → [Finished Stamp].

  • If the stamp is not marked clearly, see "Maintenance."

  • Back To Top