This mode enables you to repeatedly copy the entire original image in either the vertical or horizontal direction.

The following two settings are available for the Image Repeat mode.

• Automatic Setting

The original image is copied so that the maximum possible number of repeats fit onto the selected paper size.

• Manual Setting

The original image is copied the specified number of times.

• For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."

1. Place your originals → press [Options] → [Repeat Images].

2. Set the number of times that you want the image to repeat for both the vertical and horizontal directions.

• If you want to set the number of repeats automatically:

• If you want to set the number of repeats manually:

• If you want to set the number of repeats automatically:

• Press [Auto].

If [Auto] is already selected, this step is not necessary.

• If you want to set the number of repeats manually:

• Press [-] or [+] to set the number of times that you want the image to repeat.

• The repeated images may overlap or have gaps between them, depending on the number of repeats that you set.

3. To specify the amount of the space between repeated images, press [Gutter Settings].

If you do not specify [Gutter Settings], proceed to step 5.

4. Specify the amount of space between repeated images using [-] and [+].

• If you want to set the same amount of space for all four sides:

• If you want to set the top, left, right, and bottom spaces independently:

• If you want to set the same amount of space for all four sides:

• Press [-] or [+] to set the amount of space → press [OK].

• If you want to set the top, left, right, and bottom spaces independently:

• Press [Independent Adjustment].

• Select the space to adjust → press [-] or [+] to set its size → press [OK].

To return to the screen for setting the same amount of space for all four sides, press [Uniform Gutter].

5. Press [OK].

• Back To Top