You can recall the three most recent copy jobs and make copies using these settings.

• The machine considers any one of the following operations a copy job:

• When copy settings, such as the copy ratio, number of copies, and copy exposure, are specified and then, the control panel power switch, (Start), or (Reset) is pressed

• If and when the Auto Reset mode activates after copy settings are specified

• If you recall copy settings stored in Favorite Settings
  Therefore, if you make settings but do not press the control panel power switch, (Start), or (Reset), and the Auto Reset mode does not activate, the settings you have made are not stored memory for recall by pressing [Recent Settings].

• You cannot recall the Merge Job Blocks mode.

• The Standard mode is not stored in Recent Settings memory.

• Identical copy settings are stored only once in Recent Settings memory.

• Once stored, the last three copy jobs are kept in memory even if the power is turned OFF.

1. Place your original → press [Options] → [Previous Settings].

2. Select [History 1], [History 2], or [History 3].

3. Verify the settings → press [OK].

• You can change the recalled copy settings before making copies.

• Back To Top