Return to Overview

For instructions on this procedure using the Regular Copy Basic Features screen, see "Changing Color Modes."

• When the Auto (Color/Black) mode is set, black-and-white copies are output at the same speed as color copies.

• When the Auto (Color/Black) mode is set and your originals contain color sections, the machine scans them in the Full Color mode. However, the machine may scan the color originals in the Black mode under the following conditions. To avoid this, set the color mode to 'Full Color'.

• If the originals contain a few color sections

• If the originals contain light color densities

• If the color sections of the originals are close to black

• If the Single Color mode is selected, you can select Red, Green, Blue, Yellow, Magenta, or Cyan as the color.

• If the Two Colors mode is selected, you can select Red, Green, Blue, Yellow, Magenta, or Cyan as the color.

• If you scan different sized originals without setting the Different Size Originals mode or selecting a non-standard paper size as the paper size, the machine may not be able to detect whether your originals are color or black-and-white.

1. Select the color mode.

If you want to select [Auto (Color/Black)], [Full Color], or [Black], press the color mode for the desired selection.

If you select [Single Color] or [Two Colors], the following screen is displayed.

• If you select [Single Color]:

• If you select [Two Colors]:

• If you select [Single Color]:

• Press [Single Color].

• Select the desired color ([Red], [Green], [Blue], [Yellow], [Magenta], or [Cyan]) → press [OK].

• If you select [Two Colors]:

• Press [Two Colors].

• Select the color you want to combine with black ([Red], [Green], [Blue], [Yellow], [Magenta], or [Cyan]) → press [OK].

• Back To Top