Return to Overview

This feature enables you to make two-sided copies from facing pages, or from the front and back sides of a page in bound originals, such as books and magazines.

• Left/Right Two-sided

This setting makes two-sided copies from facing pages.

• Front/Back Two-sided

This setting makes two-sided copies from the front and back sides of a page.

• Only LTR paper can be used for Book2-Sided copying.

• If you select [Front/Back 2-Sided], the front side of the first two-sided page and the back side of the last two-sided page are left blank. (The machine's counter does not count the blank pages as copies.)

• Place your original on the platen glass. The Book2-Sided mode cannot be used when the original is placed in the feeder.

1. Place your original on the platen glass → press [Options] → [2-Sided].

To make copies in the correct page order, begin copying from the first open page of the book or bound original.

Place your original face down, making sure that its top edge is aligned with the back edge of the platen glass (by the arrow in the top left corner).

2. Press [Book2-Sided].

3. Press [Set Details] → select the desired type of two-sided layout → press [OK].

Details of each item are shown below.

4. Press (Start).

To copy the next two facing pages, turn the page of the original → place your original on the platen glass → press (Start).

5. When scanning is complete, press [Start Copying].

• Back To Top