Return to Overview

This feature enables you to make two-sided copies from one-sided originals.

• Make sure to place originals with a horizontal (landscape) orientation, such as LTRR and STMTR, horizontally. If these originals are placed vertically, the back side of the copy is printed upside down.

• If there are an odd number of originals, the back side of the last copy is left blank. (The machine's counter does not count the blank page as a copy.)

• If the 2-Sided mode is used with the Different Size Originals mode, the copies of different size originals will be printed as one-sided copies on paper of their respective sizes. If you want to make two-sided copies with different size originals, you must select the paper size beforehand.

1. Place your originals → press [Options] → [2-Sided].

2. Press [1-Sided2-Sided].

To set the orientation of two-sided copies, press [Set Details] → select the type of two-sided orientation → press [OK].

Details of each item are shown below.

3. Press [OK].

4. Press (Start).

• Back To Top